Hi,
if I want to convert the current density INA [mA/cm2] in nA I should divide the current in mA/cm2 by the factor (area*(0.01)):
INA/(area*(0.01))
if I want to convert the quantity X [mM/ms] in nA I should multiply by the FARADAY constant expressed in C/mol, by 10(numenbr of electrons in the Na+ ), 0.001 (factor to convert mol in mM), 1000 to convert ms in s, 10^12 to convert from A to nA:
X/((FARADAY)*(10^12))
Is this forumaltion with brackets correct?
Thanks
Best
Menica
conversion units
Moderators: wwlytton, tom_morse

 Site Admin
 Posts: 5784
 Joined: Wed May 18, 2005 4:50 pm
 Location: Yale University School of Medicine
 Contact:
Re: conversion units
True, assuming that area is in units of um2.if I want to convert the current density INA [mA/cm2] in nA I should divide the current in mA/cm2 by the factor (area*(0.01)):
INA/(area*(0.01))
No. mM/ms is numerically equal to mol/s. Multiplying that by FARADAY converts to coulombs/second == amperes. The complete conversion from mM/ms to nA is simply *FARADAY*1e9.if I want to convert the quantity X [mM/ms] in nA I should multiply by the FARADAY constant expressed in C/mol, by 10(numenbr of electrons in the Na+ ), 0.001 (factor to convert mol in mM), 1000 to convert ms in s, 10^12 to convert from A to nA:
X/((FARADAY)*(10^12))
Re: conversion units
Hi,
I have a doubt in mA/cm2 to nA conversion:
Explanation:
So, mA/cm2 to nA ==> ina (in mA/cm2) *area(in um2) *0.01
(Note: Using different Na current notation (ina) than mentioned in question (INA) but similar to NEURON currents)
Similarly, converting nA to mA/cm2 will be done by
INA (in nA) /(area(in um2) *0.01)
(Note the different Na current notation)
Also, for this:
how to account for factor (1/Litre) or (1/1000 cm3) which is the volume in the conversion?
Thanks,
Darshan
I have a doubt in mA/cm2 to nA conversion:
Shouldn't the current in mA/cm2 be multiplied by (area*0.01) to convert it into nAif I want to convert the current density INA [mA/cm2] in nA I should divide the current in mA/cm2 by the factor (area*(0.01)):
INA/(area*(0.01))
True, assuming that area is in units of um2.
Explanation:
Code: Select all
Multiplying current in mA/cm2 with area in um2
mA/cm2 * area (in um2)
= mA/cm2 * 10^(8) cm2
= 10^(8) mA = 10^(2) * 10^(9)A
= 0.01 nA
(Note: Using different Na current notation (ina) than mentioned in question (INA) but similar to NEURON currents)
Similarly, converting nA to mA/cm2 will be done by
INA (in nA) /(area(in um2) *0.01)
(Note the different Na current notation)
Also, for this:
if I want to convert the quantity X [mM/ms] in nA I should multiply by the FARADAY constant expressed in C/mol, by 10(numenbr of electrons in the Na+ ), 0.001 (factor to convert mol in mM), 1000 to convert ms in s, 10^12 to convert from A to nA:
X/((FARADAY)*(10^12))
No. mM/ms is numerically equal to mol/s. Multiplying that by FARADAY converts to coulombs/second == amperes. The complete conversion from mM/ms to nA is simply *FARADAY*1e9.
Code: Select all
mM/ms *FARADAY (in C/mol)
= M/s *C/mol
= mol/(Litres) *C/mol
= C/s *(1/Litre)
= A/Litre
= (10^9/10^9) *A/Litre
= 10^9 nA/Litre
Thanks,
Darshan

 Site Admin
 Posts: 5784
 Joined: Wed May 18, 2005 4:50 pm
 Location: Yale University School of Medicine
 Contact:
Re: conversion units
You're absolutely right about this. I was in a hurry to reply and made a couple of very stupid mistakes.
A quick way to derive the conversion formula starts from this fact: for a cell with 100 um2 surface area, a membrane current density in mA/cm2 is numerically identical to net membrane current in nA, i.e. a membrane current density of X mA/cm2 is equivalent to a net membrane current of X nA. For example, if you have a cell with surface area A um2, and you know that sodium current density is Y mA/cm2, the net (i.e. total) sodium current in nA is Y * A/100.
Don't forget volume and ionic chargethe conversion factor becomes vol*z*FARADAY*1e9 where vol is the volume of accumulation in liters. Surface area of the volume of accumulation plays no role in the conversion.mM/ms is numerically equal to mol/s. Multiplying that by FARADAY converts to coulombs/second == amperes. The complete conversion from mM/ms to nA is simply *FARADAY*1e9.
Re: conversion units
Thank you for clearing these doubts!

 Site Admin
 Posts: 5784
 Joined: Wed May 18, 2005 4:50 pm
 Location: Yale University School of Medicine
 Contact:
Re: conversion units
We have just seen yet another demonstration of the value of multiple eyes examining the same code.